Shared mission, open platform, joint future growth

【Job Responsibilities】

1、Assist in stamping mold structural scheme design, 3D modeling, mold drawing creation and optimization, and support overall mold development.

2、Help conduct mold process analysis, strip layout, structure selection and strength verification, and deliver mold design technical documents.

3、Follow the whole process of mold manufacturing, trial stamping and mold revision, record trial issues, assist in root cause analysis and propose optimization plans.

4、Support stamping production site, resolve process anomalies such as jamming, deformation and wear during mold operation to improve production stability and yield.

5、Participate in sorting standardized and universal mold structures, optimize mold design to reduce manufacturing cost and extend mold service life.

6、Sort and archive mold drawings, BOM, inspection standards and technical documents, and support the department to deliver project milestones.

【Job Requirements】

1、Bachelor’s degree or above, major in Material Forming and Control Engineering, Mechanical Design or related disciplines.

2、Basic knowledge of stamping process and mold structure. Proficiency in CAD, SolidWorks and other design software is preferred.

3、Good spatial structural thinking and problem analysis ability, willing to engage in mold design career.

4、Rigorous, practical and responsible, with good teamwork and communication skills.

【Job Responsibilities】

1、Assist in on-site warehouse management, standardize full-cycle operations including material receiving, putaway, location management, outbound delivery and inventory counting.

2、Perform inventory data analysis, monitor inventory accuracy, organize regular stocktaking, and follow up root cause analysis and closure of inventory gains and losses.

3、Participate in warehouse process optimization, sort out location planning, material turnover and operating standards to improve warehouse efficiency.

4、Maintain data in warehouse management system, ensure consistency between accounts and physical stock, and prepare warehouse statistical reports.

5、Liaise with PMC, procurement and production teams to ensure smooth material flow and handle abnormal issues in warehousing.

6、Promote warehouse 5S, material protection and warehouse safety management, and file warehouse technical documents and process records.

【Job Requirements】

1、Bachelor’s degree or above, major in Logistics Management, Statistics, Accounting or related fields.

2、Data analysis mindset, proficient in Excel. Internship experience in warehousing or supply chain is preferred.

3、Meticulous and rigorous, interested in warehousing & supply chain management, willing to work on-site in warehouse.

4、Good communication and coordination skills, strong execution and process-oriented thinking.

【Job Responsibilities】

1、Assist in coordinating production and material planning, follow up order delivery dates, sort out material requirements and generate material requirement plans.

2、Monitor material kitting status, coordinate with procurement, warehouse and production teams, track material arrivals and issue shortage alerts to ensure smooth production scheduling.

3、Maintain planning-related ledgers, collect data on orders, materials and capacity, organize data and generate reports.

4、Track the execution progress of production work orders, feed back plan execution exceptions, and help coordinate the resolution of material and capacity issues.

5、Participate in inventory data verification and assist in improving material turnover and inventory structure.

6、Sort and archive planning documents, and perform other PMC-related tasks assigned by the department.

【Job Requirements】

1、Bachelor’s degree or above, major in Logistics Management, Statistics, Accounting or related fields.

2、asic data analysis capability, proficient in Excel with skills in PivotTable and functions.

3、Clear logical thinking, interested in planning and supply chain business. Supply chain internship experience is preferred.

4、Meticulous and organized, capable of working under pressure, with strong communication and coordination awareness.

【Job Responsibilities】

1、Design schemes for electrical control systems, test circuits and auxiliary electrical control devices on production sites, and implement projects for production line efficiency improvement and process optimization.

2、Investigate electrical pain points of production lines, evaluate improvement plans and select components, and deliver technical documents such as electrical schematics and BOM lists.

3、Follow up assembly and commissioning of electrical control prototypes, conduct circuit and parameter tests, verify scheme feasibility and iteratively optimize control logic.

4、Coordinate with suppliers to confirm component selection and track samples, resolve electrical and electromagnetic technical problems during prototype trial and on-site application.

5、Sort and archive technical documents including electrical drawings, commissioning records and improvement reports, and participate in cost reduction and yield improvement projects for production lines.

6、Collaborate with process, production and equipment teams to identify on-site electrical and electromagnetic risks, and drive the full implementation and closure of improvement projects.

【Job Requirements】

1、Bachelor’s degree or above, major in Mechanical Design, Electrical Automation, Applied Physics, Electromagnetism or related disciplines.

2、Solid foundation in electromagnetic principles, circuits and electromagnetic fields, basic knowledge of electrical control. Relevant course projects and physical commissioning experience are preferred.

3、Willing to work on production site, with good capabilities of problem analysis and scheme design.

4、Rigorous logic and strong practical ability, with good awareness of cross-department communication and collaboration.

【Job Responsibilities】

1、Responsible for the mechanical structure and component scheme design of production line tooling and improvement equipment, and complete the output of engineering drawings.

2、Conduct BOM compilation, basic tolerance analysis, strength verification and material selection, and complete preliminary cost evaluation.

3、Participate in prototype trial production, assembly commissioning and testing verification, identify structural problems during assembly and trial manufacturing, and propose optimization ideas.

4、Compile technical documents such as design specifications and inspection standards, and manage the filing of drawings and technical data.

5、Assist the process, production and quality departments in identifying production line pain points, implementing structural improvement schemes and solving on-site technical problems.

6、Communicate with suppliers for sample confirmation and technical negotiation, and follow up the quality of components.

7、Follow the company’s R&D procedures, participate in design review and design changes, and implement version control.

【Job Requirements】

1、Bachelor’s degree or above, major in Applied Physics or related fields.

2、Theoretical foundation in mechanics, materials and structures. Proficiency in SolidWorks and CAD is preferred; knowledge of CAE simulation and motion analysis is a plus.

3、Basic knowledge of automation including common transmission mechanisms, pneumatics, vacuum systems and sensors is preferred.

4、Basic understanding of machining, sheet metal and assembly processes is preferred.

5、Able to read basic electrical schematics and possess cross-department collaboration awareness.

6、Rigorous, practical and responsible, able to adapt to project-based work rhythm. Project experience such as curriculum design and physical prototype fabrication is preferred.

【Job Responsibilities】

1、Participate in new product introduction, compile, revise and maintain process documents including SOP and work instructions to support smooth transition from prototype to mass production.

2、Take charge of product process, machining and assembly procedures, including process scheme evaluation and iterative optimization of process parameters, or focus on component machining and complete machine assembly, optimize tooling and fixtures, and handle on-site assembly abnormalities on production lines.

3、Follow the whole process of trial production and capacity ramp-up, identify process issues and drive improvements to continuously raise product yield and production stability.

4、Collaborate with R&D, quality and equipment teams to carry out process verification and problem review, and issue trial production reports and process improvement reports.

5、Identify process risks, promote the implementation of process standardization, and follow up the closure of improvement actions.

6、Archive process technical documents to ensure stable operation of production lines.

【Job Requirements】

1、Bachelor’s degree or above, major in Mechanical Design, Electrical Automation, Applied Physics, Electromagnetism or related disciplines.

2、Master basic knowledge of mechanical machining & assembly or electrical control. Factory internship or process project experience is preferred.

3、Willing to work on production site, with strong practical skills and the ability to analyze and break down problems.

4、Practical and rigorous, with good cross-department communication and collaboration skills, able to adapt to project-based work rhythm.

【Job Responsibilities】

1、Participate in new product introduction, take charge of product process and machining & assembly process respectively, assist in product process scheme evaluation and preparation of process documents (SOP, work instructions, etc.).

2、Follow prototype trial manufacturing and low-volume pilot production, track the whole process of product machining and assembly, collect problems arising during pilot production, and organize analysis and improvement of process issues.

3、Assist in commissioning and optimization of process parameters, resolve process difficulties in machining and assembly, and improve product yield and manufacturability.

4、Liaise with R&D, production and quality departments to promote process implementation from prototype to mass production, and deliver pilot production reports and process improvement records.

5、Participate in evaluation of component machining processes and assembly tooling & fixtures, identify process risks and propose improvement countermeasures.

6、Sort and archive process-related documents, and support the closure of process problems in mass production stage.

【Job Requirements】

 1、Bachelor’s degree or above, major in Theoretical and Applied Mechanics, Electromagnetism, Materials Science and Engineering, Metallic Materials Engineering, Mechanical Design or related disciplines.

2、Basic understanding of material properties, mechanical machining and assembly processes. Course experiments, process-related research projects or factory internship experience is preferred.

3、Possess basic problem analysis capability, willing to work on production lines and have strong practical skills.

4、Practical and rigorous with good communication and collaboration skills, able to adapt to project-based work rhythm.

【Job Responsibilities】

1、Assist in incoming quality control including incoming inspection, sample confirmation and material abnormality judgment to guarantee the quality of incoming materials.

2、Assist in sorting out and improving incoming inspection standards and operating specifications.

3、Follow up the handling of incoming non-conformities, and cooperate with SQE, supply chain and production teams to drive corrective actions and close issues.

4、Statistically analyze incoming quality data and generate quality-related reports.

5、Assist in inspection and measuring tool check and maintenance to ensure reliable test results.

6、Support the introduction of new product materials, and participate in new material evaluation and quality tracking of pilot production materials.

【Job Requirements】

1、Bachelor’s degree or above, major in Measurement, Control Technology and Instruments, Precision Instruments or related disciplines.

2、Master basic professional knowledge of measurement, inspection and error analysis. Familiarity with component inspection procedures is preferred.

3、Basic knowledge of quality system is required. Quality-related internship or course project experience is preferred.

4、Proficient in office software, capable of data sorting and simple report analysis.

5、Rigorous and careful, strong sense of responsibility, with good communication and coordination skills as well as teamwork awareness.

【Job Responsibilities】

1、Assist in monitoring the quality status of deliverables during new product development and design phase, and follow up the process milestones of design, pilot production and production transfer.

2、Participate in full-cycle quality control of new products, assist with APQP and PPAP related work, support confirmation of control plans and operation standards, and cooperate with the NPI team to complete evaluations on product performance, structure and pilot production.

3、Assist in the preparation and risk analysis of DFMEA and PFMEA documents.

4、Cooperate with the NPI team to identify quality risks in the new product introduction stage, and participate in feasibility assessment of products and tooling & fixtures.

5、Complete other tasks assigned by the supervisor.

【Job Requirements】

1、Bachelor’s degree or above, major in Material Forming and Control Engineering, Theoretical and Applied Mechanics, Electromagnetism, Metallic Materials Engineering, Materials Science and Engineering, Measurement, Control Technology and Instruments or related disciplines.

2、Master basic theories of materials and mechanics, understand basic processes of plastic and hardware products, and be interested in product design quality work.

3、Familiarity with concepts of quality tools such as DFMEA/PFMEA, five core quality tools, APQP/PPAP is preferred.

4、Basic knowledge of ISO9001 and IATF16949 quality systems is preferred.

5、Strong logical thinking ability, good communication and collaboration skills, rigorous and careful in work, and willing to learn businesses related to new product introduction and design quality.

【Job Responsibilities】

1、Assist in tracking suppliers' 8D improvement reports, follow up the implementation effect of improvements and support on-site supplier audits.

2、Participate in new supplier evaluation and annual supplier audits, and drive the closure of corrective actions for supplier non-conformities.

3、Assist in monthly and annual supplier performance assessment and provide support for supplier classification management.

4、Assist in promoting the construction of supplier quality system and quality coaching, and learn relevant requirements of IATF16949 system.

5、Assist in collecting suppliers' environmental documents and follow up improvements on restricted hazardous substances and environmental issues.

6、Assist in handling supplier quality issues from production lines, incoming materials and customer complaints, and learn supervision and management of 4M1E changes.

7、Assist in compiling supplier quality documents, track the achievement of quality targets, and complete other tasks assigned by the supervisor.

【Job Requirements】

1、Bachelor’s degree or above, major in Material Forming and Control Engineering, Theoretical and Applied Mechanics, Electromagnetism, Metallic Materials Engineering, Materials Science and Engineering, Measurement, Control Technology and Instruments or related disciplines.

2、Master basic theories of plastic and hardware molds and forming processes, and be interested in supplier quality management.

3、Familiar with concepts of ISO9001 and IATF16949 quality systems; knowledge of the five core quality tools is preferred.

4、Good communication and coordination skills, clear logical thinking, rigorous and careful in work, strong execution ability, and willing to learn business related to quality audit and supplier management.

【Job Responsibilities】

1、Assist in market communication work, support research on business objectives and industry market trends, and participate in discussion and formulation of market communication strategies.

2、Participate in the planning, writing and proofreading of various communication contents, including press releases, promotional copies and social media content.

3、Assist in expanding and maintaining media and self-media cooperative resources, support media communication and interview docking, and help improve corporate brand exposure and brand image.

4、Assist in planning and implementing market communication activities such as brand promotion, public relations and industry exhibitions, follow up on-site execution, and participate in activity effect review and evaluation.

5、Assist in monitoring communication data, collecting market feedback, sorting and analyzing relevant data to support iterative optimization of communication strategies.

【Job Requirements】

1、Bachelor’s degree or above, major in Art, Advertising, Marketing, Journalism and Communication or related disciplines.

2、Good copywriting skills. Relevant practices or portfolios in campus promotion, new media operation and copy creation are preferred.

3、Excellent communication and coordination skills, capable of efficient liaison with internal teams and external partners.

4、Interested in brand communication in new energy and intelligent manufacturing industries; relevant industry knowledge is preferred.

【Job Responsibilities】

1、Assist in the sales business of relays and contactors in designated regions and follow up the progress of customer projects.

2、Participate in new customer development under the guidance of department mentors, explore customer demands and help expand product sales coverage.

3、Assist in maintaining relationships with existing customers, conduct daily customer communication and follow up customer feedback.

4、Collect industry market trends and competitor information, sort out potential customer data and complete document filing.

5、Complete sales support tasks assigned by the supervisor.

【Job Requirements】

1、Bachelor’s degree or above, major in Business Administration, Marketing, Journalism & Media, Logistics Management, Human Resource Management, Electronics or related fields; management majors are preferred.

2、Good English reading and writing ability; CET-6 certificate holder is preferred.

3、Strong interest in industrial electronic components or new energy application fields; relevant project or internship experience is preferred.

4、Possess good business communication and teamwork skills, quick learner and willing to take business challenges.

5、Able to support nationwide business development and necessary business trips.